Five technologies for locking floors

There are many advantages and types of lock flooring. The reason for the large variety is that many lock flooring manufacturers have applied for patents in order to gain a favorable advantage in the market competition, forcing other laminate flooring manufacturers to have varying degrees of lock technology Make improvements. It is understood that there are as many as 17 patents for locking flooring applied internationally, but there are mainly five types of laminate flooring using locking technology:
Double-lock floor-This kind of floor has two layers of tongues and tongues, which belong to the category of short locks. Because it is a double-layer tongue, the tongue and tongue are thinner and require higher paving.

QQ截图20210414093935

Buckle type lock floor-This kind of floor is an improvement of the early lock technology. The tongue and tongue are wider, about 1 cm. The front end of the tongue and tongue is flat, and it can be directly inserted into the tongue and groove of another floor. The inverted tenon that produces the locking force is placed on the tongue and groove of another floor, which relatively increases the flat tension of the floor.
Long tongue type lock floor-because this floor has a locking force of up to 1 ton, it has higher requirements for the base material. It uses European unique white cedar as the raw material. The wood structure is uniform, and the processing density is high, and the tensile force is strong and stable. Good performance, thin and long tongue and strong locking force, no angle is needed when paving, and the floor and the floor are flat and tapped into the groove, which is more convenient for paving at corners such as door frames and radiators.
Three-dimensional chute lock floor-this kind of floor is based on the general lock floor, with an inclined surface added at the groove and a V-shaped groove at the joint, so that the long side of the floor is not easy to wear.

QQ截图20210414094138
45-degree oblique plug-in lock floor——The tongue and tongue of this kind of floor are relatively short, usually 3 mm to 5 mm. Due to the inverted tongue and tongue at the groove, a certain angle is required for paving.


Post time: Apr-14-2021